IJERT-EMS
IJERT-EMS

Study of the Properties of Concrete Containing Copper Slag as a Fine Aggregate


Study of the Properties of Concrete Containing Copper Slag as a Fine Aggregate
Authors : Srinivas C. H, S. M Muranal
Publication Date: 03-02-2015

Authors

Author(s):  Srinivas C. H, S. M Muranal

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol. 4 - Issue 02 (February - 2015)

e-ISSN:   2278-0181

Abstract

Copper slag is one of the materials which is considered as waste materials in the production of copper, which can be used as partial replacement of fine aggregates in concrete. This paper presents the results of an experimental study on various durability tests on concrete containing copper slag as partial replacement of sand. In this report, M30 grade of concrete was designed and tests were conducted with different percentage of copper slag as fine aggregate in concrete. The results indicate that workability increases with increases in the copper slag percentages. The Compressive Strength is increased upto 8.63 % as compared to normal concrete. The Rapid chloride penetration test is carried out to know the chloride ion penetrability. Also, accelerated corrosion process by galvano static weight loss method is carried out to know the corrosion rate of concrete.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     1915
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book