IJERT-EMS
IJERT-EMS

Load Flow Analysis of IEEE-3 bus system by using Mipower Software


Load Flow Analysis of IEEE-3 bus system by using Mipower Software
Authors : Sandeep Kaur, Amarbir Singh, Dr. Raja Singh Khela
Publication Date: 09-03-2015

Authors

Author(s):  Sandeep Kaur, Amarbir Singh, Dr. Raja Singh Khela

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol. 4 - Issue 03 (March - 2015)

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV4IS030015

Abstract

The load flow study or power flow analysis is very important for planning, control and operations of existing systems as well as planning its future expansion. The satisfactory operation of the system depends upon knowing the effects of interconnections, new loads, new generating stations or new transmission lines etc., before they are installed. It also helps to determine the best size and favorable locations for the power capacitors both for the improvement of the power factor and also raising the bus voltage of the electrical network. They help us to determine the best locality as well as optimal capacity of the proposed generating stations, substations or new lines. 1) For this work the gauss-seidel method is used for numerical analysis.Nowadays Mipower software is used for load flow studies.This type of analysis is useful for solving the power flow problem in different power systems which will useful to calculate the unknown quantities.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     4582
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book