IJERT-EMS
IJERT-EMS

Design of Emergency Shutdown System for Steam Turbo Generator


Design of Emergency Shutdown System for Steam Turbo Generator
Authors : P. Abiranjan, K. Vinoth, R. Natarajan, B. A. Abhijith, T. Sathies Kumar
Publication Date: 03-04-2015

Authors

Author(s):  P. Abiranjan, K. Vinoth, R. Natarajan, B. A. Abhijith, T. Sathies Kumar

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol. 4 - Issue 04 (April - 2015)

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV4IS040093

Abstract

The general purpose of a generator is to generate electrical power at higher voltages which for industrial applications. It involves large values of voltage and current controls and must be maintained within the prescribed limits to enable safe and profitable running process. In recent years all the controlling processes are carried out by Programmable Logic Controller (PLC) which is programmed to the customer’s requirements. In order to increase the reliability of the plant solid state logic is overcome by automating the power plant using Programmable Logic Controller (PLC). In addition to it a mathematical model of the steam turbo generator has been developed and its non-linear response has been obtained using MATLAB simulation. The voltage and current control can be done very efficiently by the Programmable Logic Controller (PLC) without the requirement of much man power and at reduced costs.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     522
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book