IJERT-EMS
IJERT-EMS

On the Design Fundamentals of Pulsating Heat Pipes: An Overview


On the Design Fundamentals of Pulsating Heat Pipes: An Overview
Authors : Diksha Ashok Chavan, Prof. Dr. V. M. Kale
Publication Date: 31-10-2015

Authors

Author(s):  Diksha Ashok Chavan, Prof. Dr. V. M. Kale

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 4 - Issue. 11 , November - 2015

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV4IS110052

Abstract

Pulsating heat pipes (PHPs) are the new addition to the wickless heat pipe family introduced by Akachi in 1990’s, in last few decades this device acts as a promising source for cooling electronic devices where temperature difference between source and sink is very small. Pulsating heat pipes are highly acceptable devices due to its simple design, light weight feature and small size. Initially the review is focused on mechanism of fluid transport inside the PHPs and number of parameters which effect the working of PHPs is listed. The next half outlines the fundamentals of design and effect of design parameters on Thermal Performance of PHPs. The progresses in design of Critical Diameter, Numbers of Meandering Turns, Working Fluids and Filling Ratio are reviewed in this literature.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     450
Similar-Paper

7   Paper(s) Found related to your topic:    

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book