Author(s): L. Kodandarama, M. Krishna , N. Raghavendra , K. Channakeshavalu, B. H. Maruthi
Published in: International Journal of Engineering Research & Technology
License: This work is licensed under a Creative Commons Attribution 4.0 International License.
Volume/Issue: Volume. 5 - Issue. 03 , March - 2016
Influence of electrocodeposition process parameters such as current density, solution temperature and reifnrocement loading on the corrosion behavior of Ni-WC coatings under 3.5% of NaCl solution were studied. Coatings are porousfree, continous and uniform thickenss on the MS substrate in all conditions were considered. The coatings were characterised using salt spary test under the room temperature conditon. The morphology of before and after corrosion studies was investigated using XRD, EDS and scanning electorn microscope. The corrsion resutls revealed that the higer influence of WC could be seen and other parameters such as current and solution temperature showed its influence on the corrosion properteis.
Number of Citations for this article: Data not Available
7 Paper(s) Found related to your topic:
Publish your Ph.D/Master's Thesis Online