IJERT-EMS
IJERT-EMS

Front End To Back End VLSI Design For Convolution Encoder


Front End To Back End VLSI Design For Convolution Encoder
Authors : Pravin S. Tupkari, Prof. A. S. Joshi
Publication Date: 29-11-2012

Authors

Author(s):  Pravin S. Tupkari, Prof. A. S. Joshi

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.1 - Issue 9 (November - 2012)

e-ISSN:   2278-0181

Abstract

For many digital communication system bandwidth and transmission power are limited resource and it is well known that the use of feed forward convolution encoder plays a fundamental role to increasing power and spectrum efficiency. The development of error correction technique with increasing coding gain has a limit, arising from the channel capacity. Convolution code is channel code, which extensively used in communication system. The paper describes in three phases of Feed Forward convolution Encoder. System level design as first phase, containing trellis diagram and state table RTL vie of feed forward convolution encoder also explains timing waveform and parameter require for developing the convolution encoder. Circuit level design using MOS transistor as second phase and then Layout or Physical design of feed forward convolution encoder as third phase and finally explain the application and conclusion.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     1226
Similar-Paper

7   Paper(s) Found related to your topic:    

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book