IJERT-EMS
IJERT-EMS

Abrasive Wear Behavior of Copper-Alumina Composite


Abrasive Wear Behavior of Copper-Alumina Composite
Authors : Tejas Umale, Shital Rithe, Aashul Heda, Krishna Sudheendran, Dr. S. G. Sapate
Publication Date: 08-10-2016

Authors

Author(s):  Tejas Umale, Shital Rithe, Aashul Heda, Krishna Sudheendran, Dr. S. G. Sapate

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 5 - Issue. 10 , October - 2016

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV5IS100071

Abstract

This paper presents Abrasive wear behaviour of copper-alumina composite. The abrasive wear experiments were carried out using pin on disc apparatus. The wear behaviour was studied at different grit size, RPM and load. The wear behaviour was predicted through statistical analysis of the measured wear rate at different operating conditions. The effect of grit size on wear rate is more severe as compared to RPM and load. Image analysis and hardness studies were carried out on copper alumina composite. The abraded surfaces were observed under scanning electron microscope to study the morphology of abraded surfaces and operating wear mechanism. The analysis of wear debris particles was also carried out to corroborate the findings of experiment.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     80
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book