IJERT-EMS
IJERT-EMS

Performance Improvement of Flow Rate of Spiral Chip Feeder in Pulping Screw Unit


Performance Improvement of Flow Rate of Spiral Chip Feeder in Pulping Screw Unit
Authors : Ragini Narkhede, Prof. D. B. Sadaphale
Publication Date: 05-12-2016

Authors

Author(s):  Ragini Narkhede, Prof. D. B. Sadaphale

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 5 - Issue. 12 , December - 2016

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV5IS120050

Abstract

Work proves the stability and strength of screw feeding mechanism made for outlet of pulping material augur. A screw reactor is a continuous reactor where the feed is transported and mixed by a screw (augur). The operational conditions have an influence on the process. In overall, work modeling comes into place, because it is faster and cheaper than experimenting. This work gives a list of possible modeling techniques, whether or not validated by experiments those are used for the different applications of the screw reactor. New product development shaped into conical screw feeding reactor with its shaft and flights design. Radial force effect on flight surface in spiral rotation is analysed and performed structural sustaining engineering work on it with validation results.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     61
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book