IJERT-EMS
IJERT-EMS

Determination of Optimal Size and Site of Distributed Generators using Particle Swarm Optimization Technique


Determination of Optimal Size and Site of Distributed Generators using Particle Swarm Optimization Technique
Authors : Debasish Choudhury
Publication Date: 31-12-2016

Authors

Author(s):  Debasish Choudhury

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 01 , January - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS010030

Abstract

The problem of installation of DG units at proper location and sizing is of great importance. The placement of distributed generation (DG) at non-suitable places can result increasing in system losses, implying an increase in costs and therefore having an effect opposite to the desired. This paper introduces an optimal placement method in order to sizing and sitting of distributed generation in IEEE 30 bus mesh test system to improve of voltage profile, stability, reduction of power losses etc. The algorithm for optimization is Particle Swarm Optimization (PSO). Proposed objective function is the active power losses of the system and to test the feasibility of the proposed method, five cases of power increasing from 1 to 5 DG’s are considered.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     89
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book