IJERT-EMS
IJERT-EMS

Friction Stir Welding Process & Parameters: A Review


Friction Stir Welding Process & Parameters: A Review
Authors : Prashant Pratap Mall, Jitender Panchal
Publication Date: 31-05-2017

Authors

Author(s):  Prashant Pratap Mall, Jitender Panchal

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 06 , June - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS060029

Abstract

In Friction Stir Welding (FSW) Tensile strength of welds was significantly affected by welding speed and shoulder diameter whereas welding speed strongly affected percentage elongation. Friction stir welding (FSW) modeling with a special focus on the heat generation due to the contact conditions between the FSW tool and the work piece. The thermo-mechanical conditions during FSW are very different from that registered during welding of metals, leading to completely different material flow mechanisms and weld defect morphologies.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     61
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book