IJERT-EMS
IJERT-EMS

Comparative study on Predictive Current Control and Space Vector Modulation Techniques of Direct Matrix Converter in Wind Energy Conversion System


Comparative study on Predictive Current Control and Space Vector Modulation Techniques of Direct Matrix Converter in Wind Energy Conversion System
Authors : Vineet Dahiya, Leena G
Publication Date: 03-08-2017

Authors

Author(s):  Vineet Dahiya, Leena G

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Volume. 6 - Issue. 08 , August - 2017

e-ISSN:   2278-0181

 DOI:  http://dx.doi.org/10.17577/IJERTV6IS080016

Abstract

The objective of the paper is to compare two control techniques commonly being used like predictive current control and space vector modulation in Direct Matrix Converter. These two methods are compared considering theoretical complexity and performance. The purpose of most of these methods is to generate sinusoidal currents on both input and output side. The space vector Modulation (SVM) approach is based on instantaneous space vector representation of input and output voltages and current. Due to advances in processors Predictive Control Schemes have recently emerged as feasible approaches. This strategy uses the converter and load model to predict the future behavior of load currents and power.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     21
Similar-Paper

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book