Radiation Analysis and Design of Pyramidal Horn Antenna

Radiation Analysis and Design of Pyramidal Horn Antenna
Authors : R. Kiran Chand, Dr. M V Raghavendra, K.Sathyavathi
Publication Date: 01-10-2013


Author(s):  R. Kiran Chand, Dr. M V Raghavendra, K.Sathyavathi

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.2 - Issue 10 (October - 2013)

e-ISSN:   2278-0181


In Modern times need for wideband applications has increased. In recent years there have been many research works are going on in the design of antenna system as it is the main source for any communication system. The horn is nothing more than a hollow pipe of different cross sections, which has been tapered (flared) to a larger opening. The type, direction, and amount of taper (flare) can have a profound effect on the overall performance of the element as a radiator. The Horn Antenna is widely used in the EMC measurement, radar and communication system. Especially for wireless broadband applications horn antennas are the best choice. Horn is one of the simplest and probably the most widely used microwave antenna. In this paper we present the design and radiation pattern analysis of a specific horn antenna i.e. Pyramidal Horn. The paper contains introduction to horn antennas, the pyramidal horn, design of Pyramidal horn and conclusion.


Number of Citations for this article:  Data not Available


Key Word(s):    


Number of Downloads:     1932

Call for Papers - May - 2017



                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book