IJERT-EMS
IJERT-EMS

Stress Analysis of Composite Spur Gear


Stress Analysis of Composite Spur Gear
Authors : Shanavas S.
Publication Date: 03-12-2013

Authors

Author(s):  Shanavas S.

Published in:   International Journal of Engineering Research & Technology

License:  This work is licensed under a Creative Commons Attribution 4.0 International License.

Website: www.ijert.org

Volume/Issue:   Vol.2 - Issue 12 (December - 2013)

e-ISSN:   2278-0181

Abstract

This paper investigates the static stress characteristics of an involute composite spur gear system including bending stresses and contact stresses of gears in mesh and comparing it with the existing involute cast iron spur gear system. The aim is to replace the cast iron spur gear with Carbon fibre epoxy composite spur gear due to its high strength, low weight and damping characteristics. A pair of involute spur gear is modelled in a CAD system (PRO/ ENGINEER) and FEA is done by using finite element software ANSYS 13. The bending stresses in the tooth root and contact stresses were examined using a 3-D FEM model. The bending stress obtained by finite element analysis method is compared with bending stress obtained by Lewis equation and the contact stress obtained by finite element analysis method is compared with contact stress obtained by Hertzian equation.

Citations

Number of Citations for this article:  Data not Available

Keywords

Key Word(s):    

Downloads

Number of Downloads:     1888
Similar-Paper

7   Paper(s) Found related to your topic:    

Call for Papers - May - 2017

        

 

                 Call for Thesis - 2017 

     Publish your Ph.D/Master's Thesis Online

              Publish Ph.D Master Thesis Online as Book