Design, Modal and Stress Analysis of Aircraft Composite Wing

DOI : 10.17577/IJERTCONV3IS19045

Download Full-Text PDF Cite this Publication

Text Only Version

Design, Modal and Stress Analysis of Aircraft Composite Wing

Joyel K Joseph

M. Tech. Machine design T.John Institute of Technology

Bangalore

Avinash Babu

Asst. Professor, Dept. of Mechanical.

    1. ohn Institute of Technology Bangalore

      Abstract This paper deals with the Design, modal and static stress analysis of composite wing structure for a transport aircraft. The aim is to design and analyze the Skin stringers, longerons and frames of a transport aircraft for the stresses and displacements due to the applied loads. It deals with the comparative study on particular transport aircraft. The optimum design parameters for a transport aircraft are suitably selected based on the fuselage and wing modal was design using the CATIA-V5 R19 software, which is developed by Dassault systems and is very famous for its 3D modeling capabilities. The major Wing design parameters were explained in detail and its configuration has been described. Different types of loads acting on the wings are determined and the moments, displacements, etc., are also determined. The wing structure was also explained and functions of each component and their arrangement are also studied. The methodology of finite element method and the detailed description about various FEM tools have been studied and implemented in this work. The procedure of finite element method was followed to analyze the model. The analyzing part of this project is done using the NASTRAN-PATRAN package and the results were discussed

      Keywords Composite, CATIA-V5 R19 , MSC NASTRA, MSC PATRAN, FEM.

      1. INTRODUCTION

        As a kind of new material, the advanced composite material brings about great revolution to the aircraft industry since it was introduced in the 1960s. With its wide application in aerospace structure, the advanced composite material is named as the four main materials of aerospace

        Structure along with aluminium alloy, titanium alloy, and alloy steel. The advanced composite material has its own prominent features, such as high specific strength, high specific modulus, designable performance and integral forming easily, etc. With the application of the advanced composites, the weight of the aircraft structure can be reduced by about 25% ~ 30% compared to the conventional metal structures. Moreover, the aerodynamic and flight performances can be

        Improved to the levels that the conventional materials can hardly achieve. The extensive application of advanced composites is also able to promote some further technology development of structure stealth and intelligent structure design. The aircraft structure performance is significantly dependent on the part and quality of the advanced composites used in aircraft. However, it is difficult to achieve good designs of the composites in aircraft structure to guarantee

        requirements for different missions. Therefore, to fully explore the directional properties of composites, the designable ability of structure performance and the excellent manufacturability of large component integral forming, it is necessary to introduce the principle of optimization to the composite structure design [1-6]. By using parametric modelling technique, the parametric finite element model is established to conduct stress and strain analysis of the wing. Given any set of geometric parameters, the geometric modelling, meshing, strain and stress analysis can be automatically carried out in sequence. To ensure the optimal solution can be obtained, a two-step optimization search strategy which combines genetic algorithm (GA) and sequential quadratic programming (SQP) is proposed during optimization. It is concluded that this two-step optimization search strategy can greatly enhance the efficiency of finding the true optimal solution through comparing this method with GA.

      2. GEOMETRICAL CONFIGURATION

        The wing design is an iterative process and the selections or calculations are usually repeated several times. A variety of tools and software based on aerodynamics and numerical methods have been developed in the past decades, there by a reduction in the number of iterations is observed. Normally two spar construction is common in transport aircraft wing design. The spar near to the leading edge of the wing is called as front spar and the spar closer to the aft portion of the wing is called as rear spar of the wing. One end of the spar near the root of the wing is connected to the fuselage called root of wing, the other end towards the tip of the wing is a free end. This configuration is very similar to the cantilever beam arrangement in any engineering structure. Spars and Ribs are connected using L angle fittings. The following equations are used in design of wing. Figure 1 below shows the dimensions of wing Figure 2 shows the complete wing structure modelled in CATIA V5.

        1. Lift coefficient

          CLmax = 2×W/ ×(VSTALL)2×S (1)

          CLmax =Coefficient of lift

          W =Maximum take off weight VSTALL =Cruise speed x0.25

          S =Wing area

          =Density

        2. Chord length

          C = Chord length S = Wing area

          b = Wing span

          C=S/b (2)

        3. Induced drag coefficient

          2

          2

          CDi = CL / (×e×AR) (3)

          e = Oswald efficiency factor AR = Aspect Ratio

        4. Oswald efficiency factor

          e = 4.61(1-0.045A^0.68)(cos(ALE))^0.15-3.1 (4)

          ALE =sweep back angle

        5. Profile drag coefficient

          CDo = Cfe×(Swef / Sref ) (5) Cfe = Equivalent skin friction co efficient

          Swef / Sref = Wetted area ratios

        6. Total drag coefficient

          CD = CDo + CDi (6)

          CDi = Induced drag co efficient CDo = Profile drag co efficient

        7. Root chord

          Croot = 2×S / b*(1+) (7) = Taper ratio

        8. Tip chord

          Ctip = ×Croot (8)

          Ctip = Tip chord Croot = Root chord

        9. Exposed wing span

        Semispan = b/2 (9)

        Fig.1 Dimensions of wing.

        Fig.2 Wing structure modeled using CATIA V5.

      3. MATERIAL SELECTION AND SPECIFICATION

        The general principle of fibre reinforced plastic consists of the synergetic effect when combining the excellent mechanical properties of thin, application tailored filaments with a supporting matrix material.

        The first large-scale applications of FRP in aircraft wing design date back to the 1960s, while the development of composite modelling and optimization methods essentially started in the 1970s aircraft manufacturers like Airbus and Boeing with the A350 and B787 have just lately introduced aircraft types featuring entire components like wing and fuselage made of composites

        Fiber reinforced plastics (FRP) represented one of the most important milestones in the latest aviation history. A prominent advantage of composites over metal-based materials is found in the excellent stiffness to mass and strength to mass ratios that go along with the considerably lower material density.

        Table I. Mechanical properties of the carbon fiber reinforced plastic

      4. FINITE ELEMENT MODELING OF WING STRUCTURE

        The model assembly is converted to igs file and imported to MSC PATRAN as shown in fig 3:

        Fig.3 Model imported to MSC PATRAN

        Finite element modelling is completed in MSc Patran using the IGS file as geometry, the element type used for meshing was 2D shell elements with QUAD4 element topology and different parts are connected using RBE2 connection as shown in the following figures.

        Fig.4 Upper skin meshed.

        Fig.5 Lower skin meshed.

        Fig.6 Ribs meshed.

        Fig.7 Spars meshed.

        Fig.8 Complete meshed wing.

      5. LAD AND BOUNDRY CONDITIONS

        Verification for the boundary, duplicates is carried out. Normal for each element is assigned. The material properties are assigned to every element in the model. The stress analysis of the wing structure is carried out using the finite element analysis approach.

        The wing structure of an aircraft is connected to the fuselage through keel beam. So the wing structure is act as a cantilever beam connected with fuselage. One end of the wing structure can be fixed and taken as the boundary conditions of the model. This was satisfied by fixing all six degrees of freedom on the nodes corresponding to the fixing point.

        Fig.9 Wing spars fixed to the fuselage.

        Fig.10 Pressure acting on the skin of wing.

        Fig.11 Pressure forces acting on the elementary areas.

      6. FE MODELING AND STRESS ANALYSIS OF WING STRUCTURE

        The static analyses were conducted by using the solver

        101 module of MSC®/ NASTRAN package program. Figures shows the displacement field of the wing torque box under the load conditions. Figures also shows the stress distribution on the internal structure and the maximum stress location respectively. Comparing this value with the yield strength of Aluminium 7075-T651, which was given as 503 [MPa], it was concluded that the wing is far safe with a large margin of safety

        Fig.12 Ribs of aluminium alloy.

        Fig.13 Ribs of aluminium alloy.

        Fig.14 Ribs of aluminium alloy.

        Fig.15 Ribs of aluminium alloy.

        Fig.16 Ribs of aluminium alloy.

        Fig.17 Spars of aluminium alloy.

        Fig.18 Spars of aluminium alloy.

        Fig 19 Spars of aluminium alloy

        Fig.20 Spars of aluminium alloy.

        Fig.21 Spars of aluminium alloy.

        Fig.22 Spars of aluminium alloy.

        Fig.23 Ribs of CFRP.

        Fig.24 Ribs of CFRP.

        Fig.25 Ribs of CFRP.

        Fig.26 Ribs of CFRP.

        Fig.27 Ribs of CFRP.

        Fig.28 Spars of CFRP.

        Fig.29 Spars of CFRP.

        Fig30 Spars of CFRP.

        Fig.31 Spars of CFRP.

        Fig.32 Spars of CFRP.

      7. CONCLUSION

The Von Mises stress distribution in the case of wing is less towards the wings leading and trailing edges and decreases towards the wing tip. The variation in fiber orientation at the same skin thickness will produce the variation in the Von Mises stress (increase or decrease). Maximum values of Von-Mises stress was observed at the support position of the combined wing. The largest magnitude of displacement was obtained at the free end of the combined wing. The replacement of Aluminium alloy by CFRP reduces the total weight of the aircraft wing by 23.7%. By comparing the stress and displacement in Table 2, it is concluded that the CFRP is seen to have better performance. Thus it is desirable to adopt the CFRP material for composite aircraft wings in comparison with the conventional aluminium alloy considered in the present study.

CFRP

obtained stress

uts

RF value

MOS

von mises

216

1450

6.712963

5.712963

max principal

90

1450

16.11111

15.11111

max shear

123

870

7.073171

6.073171

Aluminium

von mises

252

483

1.916667

0.916667

max principal

241

483

2.004149

1.004149

max shear

130

283

2.176923

1.176923

Table II. RF table comparing the responses of CFRP and Aluminium alloy

REFERENCES

  1. International Journal of Innovative Research in Science, Engineering and Technology Vol. 2, Issue 6, June 2013. Jones R. T The spanwise distribution of lift for minimum induced drag of wings having a given lift and a given bending moment Tech. Rep. TN-2249, NASA, December 1950.

  2. School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China. The Open Mechanical Engineering Journal, 2011, 5, 11-18.

  3. Journal of Engineering and Development, Vol. 12, No. 1, March (2008)

  4. Graeme J. Kennedy and Joaquim R. R. A. Martinsy, A Comparison of Metallic and Composite Aircraft Wings Using Aerostructural Design Optimization, University of Toronto Institute for Aerospace Studies, Toronto, ON, Canada.

  5. Peter J Rohl, Dimitri N Mavris and Daniel P Schrage, Combined aero dynamic and Structural Optimization of a high speed civil transport Wing, School of Aerospace Engineering, Georgia Institute of Technology Atlanta.

  6. Kong, h. park, y. Kim and k. Kang Structural design on wing of a small scale wig vehicle with carbon/epoxy and foam sandwich composite structure, 16th international conference on composite material

  7. F. H. Darwisha, G. M. Atmeh and Z. F. Hasan Design analysis and modeling of general aviation aircraft, Jordan Journal of Mechanical and Industrial Engineering Volume 6, Number 2, pp 183-191, 2012.

  8. Levent Ãœnlusoy Structural design and analysis of the mission adaptive wings of an unmanned aerial vehicle, A thesis submitted to Middle East Technical University, Febuary 2010.

Leave a Reply