![](wp-content/uploads/doi-ijert-logo.png)
![](https://www.ijert.org/author-photo/V13IS8/IJERTV13IS080040.jpg)
- Open Access
- Authors : Dr. Pradeep Kundu
- Paper ID : IJERTV13IS080040
- Volume & Issue : Volume 13, Issue 08 (August 2024)
- Published (First Online): 23-08-2024
- ISSN (Online) : 2278-0181
- Publisher Name : IJERT
- License:
This work is licensed under a Creative Commons Attribution 4.0 International License
A Novel Versatile Method of Generating Soft Halftone Proofs
Dr. Pradeep Kundu
Department of Printing Engineering, Jadavpur University, Saltlake Campus, Kolkata 700098, INDIA,
Abstract
Soft color halftone proofing is the most important requirement in the reproduction of digital color images. Soft color halftone proofs built from individual color separations screened at a required screen angle, in case of AM screening and only screened, in case of FM screening, might give a printer the exact prediction of colors and tonal gradations. The present work is an attempt to solve the problem of screened soft color halftone proofing with a versatile approach.
Keywords: color halftone, amplitude modulation, frequency modulation, multiply, progressive proofs.
-
Symbols AM: Amplitude Modulated FM: Frequency Modulated
DPI: Dots per Inch K: Black
C: Cyan M: Magenta Y: Yellow
R: Red G: Green B: Blue
-
INTRODUCTION
Digital soft color halftone proofs are the most important requirements in predicting the results of print production. Digital proofs on color monitor always take a fore seat once an image is ready for further processing especially in print production. Existing image-editing tools like Adobe Photoshop, Corel Photo-Paint, have not provided any readily available imaging filter tools that may create soft color halftone proofs with wide range of screening methods like AM with various dot sizes or FM screening. The filter tool like color halftone in Adobe Photoshop 7.0 create a special effect with AM anti-aliased round dots with different screen angles, which is equivalent to soft-screened proof of one kind. The halftone tool of Corel Photo-Paint 11 provides similar facility to create AM based screened proof. Corel Paint Shop Pro 9.0 also provides similar facility for creating soft halftone proofs. These above-mentioned filters to generate color-screened images are not versatile as already mentioned. In the present work an attempt has been made to fill that lacuna in soft color halftone proofing which is capable of producing both AM and FM soft color halftone proofs.
-
EXPERIMENTAL PROCEDURES
The Adobe Photoshop 7.0 has been selected as the main platform to work with.
-
For the new method of generating soft color halftone proofs main procedure steps are as follows
-
Editing the sample image in RGB color mode.
-
Converting to CMYK color mode using suitable setup.
-
Doing necessary corrections.
-
Separating the four plates (K, C, M and Y) by splitting the channels, this creates four gray images corresponding to each process color.
-
Generating halftones either AM or FM for the four plates.
-
Converting four plates to one-bit gray image and then to CMYK color mode and colorizing four halftone plates using the process colors.
-
Combining all the four plates in separate layers, in a single file.
-
Apply multiply (layer blending) effect for selected layers to create subtractive mixing of colors for the layers i.e. individual color printers as shown in figure.1.
-
Judge the final soft color halftone proof and progressive proofs.
Table: 1: Filenames and other details at various stages of AM proof generation
Original Image
Resolution (DPI)
Gray Images (Splitted)
AM Halftone Images
AM Halftone Images (Colored*)
Dotshape
Screen Angle (Degree)
LPI
flrgb or flcmyk
144
flcmyk_K
flcmyk_K_am
flcmyk_K_amc
ellipse
45
36
flcmyk_C
flcmyk_C_am
flcmyk_C_amc
Do
75
36
flcmyk_M
flcmyk_M_am
flcmyk_M_amc
Do
105
36
flcmyk_Y
flcmyk_Y_am
flcmyk_Y_amc
Do
90
36
-
Color used: Photoshop CMYK, values are given in percentages, e.g. for cyan plate C=100%, M=0%, Y=0%, K=0%, similarly for M, Y and K plate.
Progressive proofs: flcmyk_CM_amc, flcmyk_CY_amc, flcmyk_MY_amc Final Proof: flcmyk_am_proof
Table: 2: Filenames and other details at various stages of FM proof generation
Original Image
Resolution (DPI)
Gray Images (Splitted)
FM Halftone Images
FM Halftone Images (Colored*)
Screening
flrgb or flcmyk
144
flcmyk_K
flcmyk_K_fm
flcmyk_K_fmc
Diffusion dither
flcmyk_C
flcmyk_C_fm
flcmyk_C_fmc
Do
flcmyk_M
flcmyk_M_fm
flcmyk_M_fmc
Do
flcmyk_Y
flcmyk_Y_fm
flcmyk_Y_fmc
Do
-
Color used: Photoshop CMYK, values are given in percentages, e.g. for cyan plate C=100%, M=0%, Y=0%, K=0%, similarly for M, Y and K plate.
Progressive proofs: flcmyk_CM_fmc, flcmyk_CY_fmc, flcmyk_MY_fmc Final Proof: flcmyk_fm_proof
Figure.1 shows layer blending effect Multiply in Photoshop 7 of three layers containing colors in Cyan, Magenta and Yellow circles, to generate colors red, green and blue and black, which is equivalent to subtractive mixing of colors.
Figure 1: Multiply layer blending effect in Photoshop 7 of three layers Cyan, Magenta and Yellow which
is equivalent to subtractive mixing of colors.
In labeling the figures from fig.2-fig.29, the filename of the images are given in the parenthesis.
Here both Amplitude Modulated and Frequency Modulated screening is done to generate both type of halftone proofs. Fig.2 and fig.3 are the rgb and cmyk color originals. Fig.4 to fig.7 are the cyan, magenta, yellow and black plates in gray respectively.
IJERTV13IS080040
(This work is licensed under a Creative Commons Attribution 4.0 International License.)
Figure 2: Original RGB image (flrgb)
Figure 3: Original CMYK image (flcmyk)
Figure 4: Cyan part in gray (flcmyk_C)
Figure 5: Magenta part in gray (flcmyk_M)
Figure 6: Yellow part in gray (flcmyk_Y)
Figure 7: Black part in gray (flcmyk_K)
Figure 8: AM halftoned Black (flcmyk_K_amc)
Figure 9: AM halftoned Cyan (flcmyk_C_amc)
Figure 10: AM halftoned Magenta (flcmyk_M_amc)
td> Figure 11: AM halftoned Yellow (flcmyk_Y_amc)
Figure 12: Progressive Proof: Cyan and Magenta (flcmyk_CM_amc)
Figure 13: Progressive Proof: Cyan and Yellow (flcmyk_CY_amc)
Figure 14: Progressive Proof: Magenta and Yellow (flcmyk_MY_amc)
Figure 15: AM halftoned Proof (flcmyk_am_proof)
Figure 16: FM halftoned Black (flcmyk_K_fmc)
Figure 17: FM halftoned Cyan (flcmyk_C_fmc)
Figure 18: FM halftoned Magenta (flcmyk_M_fmc)
Figure 19: FM halftoned Yellow (flcmyk_Y_fmc)
Figure 20: Progressive Proof: Cyan and Magenta (flcmyk_CM_amc)
Figure 21: Progressive Proof: Cyan and Yellow (flcmyk_CY_amc)
Figure 22: Progressive Proof: Magenta and Yellow (flcmyk_MY_amc)
Figure 23: FM halftoned Proof (flcmyk_fm_proof)
Figure 24: Histogram of figure 2 (flrgb_hg)
Figure 25: Histogram of the figure 3 (flcmyk_hg)
Figure 26: Luminosity histogram of the figure 15 (am_hg_2)
Figure 27: K, C, M and Y histograms of the figure 15 (am_hg)
Figure 28: Luminosity histogram of the figure 23 (fm_hg2)
Figure 29: K, C, M and Y histograms of the figure 23 (fm_hg)
-
-
-
RESULTS AND DISCUSSIONS
Fig.8 to fig.11 are the AM screened K, C, M and Y plates respectively. Dot shape, screen angle, screen frequency (Lines per inch) and resolution (DPI) of the original images and filename details are given in the Table-1. Fig. 12 is cyan-magenta, fig 13 is cyan-yellow and fig.14 is magenta-yellow, progressive proofs. Fig.15 is the AM halftone proof. Fig.16 to fig.19 are the FM screened K, C, M and Y plates respectively. Dots per inch of the original images, type of screening used and filename details are given in the Table-2. Fig. 20 is cyan-magenta, fig 21 is cyan-yellow and fig.22 is magenta-yellow, progressive proofs. Fig.23 is FM halftone proof. Fig.24 and fig.25 are the luminosity histograms of the fig.2 and fig.3 respectively and their image-wise difference is evident in the histograms especially in darker tones. Fig.26 is the luminosity histogram of the fig.15 which shows few histogram tones because of using pure and single tone color. Fig.27 contains histograms of K, C, M and Y channels of the fig.15 which show pure and single tone K, C, M and Y colors (as intermediate tones are not available in the histograms of K, C, M and Y) are used to make AM proof. Like that fig.28 is the luminosity histogram of the FM proof (fig 23) which shows few histogram tones because of using pure and single tone color. Fig.29 contains histograms of K, C, M and Y channels of the fig.23 which show pure and single tone K, C, M and Y colors (as intermediate tones are not available in the histograms of K, C, M and Y) are used to generate the FM proof also.
-
CONCLUSIONS
The method presented here is more versatile i.e. having wider applications as both AM and FM halftone proofs can be generated. Proofs of good quality (having more image details and C, M, Y, K plates colorized with pure colors, i.e. one color not mixed with other color) can be generated by this method for both types of halftoning.
-
ACKNOWLEDGEMENTS
-
Adobe Photoshop 7.0, Adobe Systems Incorporated, 1990-2002, USA.
-
Corel Photopaint 11.633, Corel Corporation, 2002, USA
-
Matlab 6.1, The Mathworks, Inc, 1984-2001, USA
-
REFERENCES
1. Kundu, P, 2013, A Novel Approach to Non-halftone Binary Image Transformations, Digital Halftoning and Color Halftone Proofing, PhD Thesis- page no.226, Jadavpur University, Jadavpur, West Bengal, INDIA.