- Open Access
- Authors : D. Thulasi Dasan, K. S. Bhavish Kanna, N. Sankar, M. Prithivi, S. B. Sabari, A. Oorkalan
- Paper ID : IJERTCONV10IS09045
- Volume & Issue : ICONNECT – 2022 (Volume 10 – Issue 09)
- Published (First Online): 05-08-2022
- ISSN (Online) : 2278-0181
- Publisher Name : IJERT
- License: This work is licensed under a Creative Commons Attribution 4.0 International License
Stabilization of Black Cotton Soil with Bottom ash and Lime
1 D.Thulasi dasan,
Student, Department of Civil Engg, K.Ramakrishnan College of Technology, Trichy-12, india.
2 K.S.Bhavish Kanna,
Student, Department of Civil Engg, K.Ramakrishnan College of Technology, Trichy-12, india.
3 N.Sankar,
Student, Department of Civil Engg, K.Ramakrishnan College of Technology, Trichy-12, india.
4 M.Prithivi,
Student, Department of Civil Engg, K.Ramakrishnan College of Technology, Trichy-12, india.
5 S.B. Sabari,
Student, Department of Civil Engg, K.Ramakrishnan College of Technology, Trichy-12, india.
6A.Oorkalan,
6Assistant professor, Department of Civil Engg, K.Ramakrishnan College of Technology, Trichy-12, india.
AbstractBlack cotton soil (BCS) could be stabilized and made a suitable material using bottom ash. The soil treated with optimum bottom ash content of 16% was further stabilized with 2%, 4%, 6%, 8%, and 10% lime. We can see an optimal reduction in liquid limit, plasticity index as well as optimal increase in CBR and specific gravity test.The addition of lime to clay is a widely used means of chemically transforming unstable expansive clay soils into structurally sound foundation materials. Lime in the form of quicklime, CaO, was used for the treatment of the soil-SDA mixture. The lime is a pure amorphous solid with melting point of 2600°C, produced from natural limestone.In our project we are going to add black cotton soil and lime and bottom ash as additive material and stabilize the with increasing plasticity and reducing the saturation of soil.
Keywords; Black cotton soil, Bottom ash, Lime
-
INTRODUCTION
Black cotton soil is a medium to high compressible inorganic clay soil. The property of this soil is that it has a high plasticity when they are dry, and they swell when they are saturated as they have high liquid limit. So, it is not advisable to construct any type of building on this soil. This paper presents the study on which the black cotton soil is stabilised using two main components such as Bottom Ash, Lime in the form of quick lime. These components are added to the soil by in different proportions and hence the results are retrieved and use to stabilize the soil for the construction of the building. The main objective of the project is to investigate the effects of bottom ash stabilization on the geotechnical qualities of expansive soils and analyze the findings and give recommendations for best practices. To investigate the impacts of bottom ash on soil permeability reduction. As the nature of black cotton soil is that it shrinks in the summer and swells in the rainy season. The structure of the building will move upward and below because of the soil is more flexible during the wet season, the structure will penetrate deeper into the soil. Using lime and bottom ash, we want to improve the soil's bearing capacity and shear strength. In this paper we are going to see the increase in the plastic limit and decrease in the liquid
limit by adding Bottom Ash and Lime in the black cotton soil.
-
MATERIAL USED:
-
Bottom Ash
Bottom as is mostly found in the coal-fired power plant. They are coarse, granular, incombustible by-product of coal combustion that are collected at the bottom. The properties of bottom ash are mentioned in Table.1
Property
Bottom Ash
Specific Gravity
2.4
Dry Unit Weight
1200 kg/m3
Absorption
1.4 %
Table-1 Properties of bottom ash
-
Lime
Lime in the form of quick lime is a calcium containing inorganic mineral consist of oxides and hydroxides. These are largely used in building materials and other engineering materials.The properties of Hydrated lime are mentioned in Table.2
Parameter
Hydrated lime (Ca (OH)2)
Physical state
White solid
Particulate size
Powder
Bulk density
40kg/m3
Specific gravity
2.34
Table-2 Properties of Hydrated lime
Seive analysis of Black cotton soil
-
Specific gravity:
-
Soil specific gravity allows engineers to determine how porous a soil is and how many voids it contains. It also reveals how water-saturated the soil. The result of specific gravity of soil is mentioned in Table-3
-
-
Atterbergs test:
The Liquid Limit and Plastic Limit tests were performed on soil with and without bottom ash. The varying proportions of bottom ash put to the soil were 0%, 5%, 10%, 15%, 20%, and 30%. As per IS:2720 (Part 5) –
1985, this test is used to assess the plastic and liquid limits of soil.The result of plastic limit and liquid limit of soil is mentioned in Table-3
100
80
60
40
20
0
0.1
1
particle size in mm
10
Percentage of passing
Graph -2 Sieve analysis of Black cotton soil
-
Standard proctor test:
-
Standard Proctor Test is used to analyzethe soils compaction characteristics with a variety of moisture content. This test is used to find the bearing capacity of soil which is the maximum amount of load a soil can bear and to reduce the voids in the soil. The graph-2 represents dry density of Black cotton soil
-
Table-3 Properties of black cotton soil
-
Fineness test:
Dry density (g/m3)
Property
Value
Specific Gravity
2.69 kg/m3
Absorption
30 %
Liquid Limit
43 %
Plastic Limit
50 %
6.70
6.60
Standard Proctor Test
6.62 6.63
6.51 6.52
6.57
-
The fineness of cement is a measure of bottom ash particle size and is denoted as terms of the specific surface area of ash. The Fineness Test of ash is done by sieving ash sample through standard IS sieve. The result of the sieve is mentioned in the graph 1
-
Seive analysis of Bottom Ash
Percentage of passing
120
6.50
6.40
6.30
6.46
20 25 30 35 40 45
Water Content %
Graph-3Standard Proctor Test
III RESULT AND DISCUSSION
100
80
60
40
20
0
0.1 1 10
particle size in mm
Graph-1Sieve analysis of Bottom Ash
-
Unconfined compressive test:
-
The unconfined compression test is performed to determine the soil's shear strength. It is the most common, least expensive, and fastest technique of determining shear strength. The strain-controlled application o axial load can be used to evaluate intact, remolded, or reconstituted soil specimens. The unconfined compression test is performed to determine the soil's shear strength. It is the most common, least expensive, and fastest technique of determining shear strength. The strain-controlled application of axial load can be used to evaluate intact, remolded, or reconstituted soil specimens. The graph represents deflection of Black cotton soil.
-
Load in Kg BCS
20
15
Load
10
5
0
0 1 2 3 4 5
200
Load
150
100
50
0
Load in Kg BCS+20%BA+4%lime
Deflection
0 2 Deflection 4 6
Graph-3Load in Kg BCS
Graph-6Load in Kg BCS+20%BA+4%lime
100
80
Load
60
40
20
0
Load in Kg BCS+20%BA
250
200
Load
150
100
50
0
Load in Kg BCS+20%BA+6%lime
0 2 4 6
Deflection
0 2 Deflection 4
Graph-7Load in Kg BCS+20%BA +6%lime
200
150
Load
100
50
0
Graph-4Load in Kg BCS+20%BA
Load in Kg BCS+20%BA+2%LM
0 2 4 6
Deflection
Graph-5Load in Kg BCS+20%BA+2%LM
-
CONCLUSION
According to the findings of the aforesaid test, we may achieve unconfined compressive strength test results by adding varied ratios of lime of 2%, 4%, and 6%, and bottom ash at a constant ratio of 20%. It causes the black cotton soil's shear strength to gradually grow. We can add a few more percentages of lime and see if the shear strength increases or decreases.
-
REFERENCE
-
Dr.M.Sivaraja.April 2018
[2] Stabilization of black cotton soil subgrade using sawdust ash and lime.C.C. Ikeagwuani, I.N. Obeta, J.C. Agunwamba.6 October 2018 [3] A study oneffect of bottom ash and coconut shell powder on the properties of clay soil.A.T.Manikandan, Y.Ibrahim,M.P.Thiyaneswaran, B.Dheebikhaa, K.Raja Jan -2017
[4] Geotechnical Investigation of Black Cotton Soils.Vinayak Kaushal,Dr.S.P.Guleria.April 2015
[5] Effect of lime and stone dust in the geotechnical properties of black cotton soil.Ankur Mudgal, Raju Sarkar and A.K. SahuDec 2014